Adsorption of Dyes Using Multi-walled Carbon Nanotube Hydrogel

doi:10.1007/s40242-019-8228-0

Abstract

Abstract: The hydrophilic multi-walled carbon nanotube(MWCNT) hydrogel was prepared using acrylic acid, acrylamide and hydrophilic MWCNT. The orthogonal experiment was applied to optimize the synthetic conditions. The MWCNT hydrogel was characterized by Fourier transform infrared spectrophotometer(FTIR) and scanning electron microscopy(SEM) analysis. The MWCNT hydrogel was used as the adsorbent to adsorb water-soluble cationic dye. This study evaluated the adsorption performance of hydrogels on four dyes of safranine T, crystal violet, malachite green and methylene blue in water. The effects of the amount of hydrogel, the size of hydrogel, pH, and the temperature on the adsorption performance were investigated. The adsorption kinetic and adsorption isotherm curves were measured. The experimental results show that the MWCNT hydrogel can be easily separated from water and the adsorption capacity is much greater compared to the hydrogel without MWCNT. The MWCNT hydrogels can be used in wastewater treatment with a great potential.

Key words: Multi-walled carbon nanotube, Poly(acrylamide/acrylic acid), Hydrogel, Dye, Adsorption

YU Meng, LIU Miao. Adsorption of Dyes Using Multi-walled Carbon Nanotube Hydrogel[J]. Chemical Research in Chinese Universities, 2019, 35(2): 311-318.

References

[1] Chen W. H., Li G., Xu F. C., Pan X., Wen L. N., Du L. N., Journal of Zhejiang Agricultural Sciences, 2014, (2), 264
[2] Zahrim A. Y., Hilal N., Water Resources and Industry, 2013, (3), 23
[3] Constantin M., Asmarandei I., Harabagiu V., Ghimici L., Ascenzi P., Carbohydrate Polymers, 2013, 91(1), 74
[4] Shi Y. R., Li Q., Wang L., Wang A. Q., Chemical Industry and Engineering Progress, 2011, 30(10), 2294
[5] Yatin N., Manish P., Chinese Chemical Letters, 2013, 24(11), 1005
[6] Hemant M., Suprakas S., International Journal of Biological Macromolecules, 2016, 88, 66
[7] Wang F., Yao J., Yu C., Chen H., L., Yi Z. J., Martin M. F. C., ACS Sustainable Chemistry & Engineering, 2014, 2(5), 1219
[8] Lang L., Jiang L., Zhu D., Chen P., Liu R. L., Feng J. W., Environmental Science & Technology, 2014, 37(12), 166
[9] Wang W. X., Bo L. J., Xu H., Chen H., Chemistry, 2015, 78(11), 1006
[10] Han J. X., Wan H. S., Li L., Chemical Industry Times, 2015, 29(11), 1
[11] Zhou L. D., Cao T., Wang H. X., Yu H. H., Proceedings of 2011 China Functional Materials Technology and Industry Forum, Chongqing, 2011, 4708
[12] Xie G., Mao N., Zhou L. C., Pan D., Li Y. F., Chinese Journal of Environmental Engineering, 2015, 9(3), 1117
[13] Liu Z. J., Liang X. T., Zhang H. Y., New Chemical Materials, 2015, 43(5), 202
[14] Liu W. Y., Yang L. Z., Yu M., Liu M., Chinese Journal of Analytical Chemistry, 2016, 44(5), 707
[15] Liu R. J., Zhang Y. W., Wen C. W., Tang J., Experimental Technology and Management, 2010, 27(9), 52
[16] Zhang C., Chai X. S., Luo X. L., Spectroscopy and Spectral Analysis, 2010, 30(1), 247
[17] Liu P., Jiang L. P., Zhu L. X., Wang A. Q., Industrial & Engineering Chemistry Research, 2014, 53(11), 4277
[18] Li Z. L., Tang M., Dai J. W., Wang T. S., Bai R. K., Polymer, 2016, 85(2), 67
[19] Ding C. M., Gao X. F., Han Y. L., Ma X. S., Wang J. W., Liu S. B., Zhang K., Energy Chem., 2015, 24(1), 45
[20] Chen Y., Wang S. P., Applied Chemical Industry, 2016, 45(1), 127
[21] Ofomaja A., Ho S., Bioresource Technology, 2008, 99, 5411
[22] Zhang J., Deng H. P., Yabutani T., Yasuzawa M., Environmental Science, 2011, 32(11), 3348
[23] Jiang L. P., Liu P., Journal of Colloid and Interface Science, 2014, 426, 64
[24] Tucker P. C., Lita A., Latturner S. E., Chemistry of Materials, 2013, 25(9), 1480
[25] Kamel A., Mohammad S., Falah B., J. Hazard. Mater., 2011, 188, 414
[26] Wu N. M., Li Z. K., Environmental Science, 2013, 34(6), 2263