[an error occurred while processing this directive]

高等学校化学研究 ›› 2004, Vol. 20 ›› Issue (4): 489-493.

• Articles • 上一篇    下一篇

Characterization of the Engineering Flow in a Miniaturised Bioreactor by Computational Fluid Dynamics

ZHANG Hu1, Parviz Ayazi Shamlou2   

  1. 1. Advanced Centre for Biochemical Engineering, Department of Biochemical Engineering, University College London, Torrington Place, London WC1E 7JE, UK;
    2. Process Engineering Centre, Eli Lily and Company, Indianapolis, Indiana 46285, USA
  • 收稿日期:2002-06-03 出版日期:2004-08-24 发布日期:2011-08-06
  • 基金资助:

    Supported by the UCL ORS Award and KC Wong Scholarship.

Characterization of the Engineering Flow in a Miniaturised Bioreactor by Computational Fluid Dynamics

ZHANG Hu1, Parviz Ayazi Shamlou2   

  1. 1. Advanced Centre for Biochemical Engineering, Department of Biochemical Engineering, University College London, Torrington Place, London WC1E 7JE, UK;
    2. Process Engineering Centre, Eli Lily and Company, Indianapolis, Indiana 46285, USA
  • Received:2002-06-03 Online:2004-08-24 Published:2011-08-06
  • Supported by:

    Supported by the UCL ORS Award and KC Wong Scholarship.

摘要: Three approaches based on computational fluid dynamics(CFD) techniques have been assessed for their ability to describe the engineering flow environment in a miniaturized mechanically agitated bioreactor.The three approaches tested were the source-sink(SS), the multiple reference frames(MRF) and the sliding grids (SG).In all the cases, the predictions of the velocity components agree with reported experimental data.However, the analysis of the results of the turbulent intensities predicted by the three approaches indicates the MRF and the SG techniques under predicted turbulent intensities are comparable to both experimental measurements and the SS method.The predicted power number and pumping number based on the SS approach are closer to typical reported experimental values compared to those obtained from the MRF and SG methods.

关键词: Mechanically agitated bioreactor, Computational fluid dynamics, Multiple reference frame, Sliding grids, Source-sink

Abstract: Three approaches based on computational fluid dynamics(CFD) techniques have been assessed for their ability to describe the engineering flow environment in a miniaturized mechanically agitated bioreactor.The three approaches tested were the source-sink(SS), the multiple reference frames(MRF) and the sliding grids (SG).In all the cases, the predictions of the velocity components agree with reported experimental data.However, the analysis of the results of the turbulent intensities predicted by the three approaches indicates the MRF and the SG techniques under predicted turbulent intensities are comparable to both experimental measurements and the SS method.The predicted power number and pumping number based on the SS approach are closer to typical reported experimental values compared to those obtained from the MRF and SG methods.

Key words: Mechanically agitated bioreactor, Computational fluid dynamics, Multiple reference frame, Sliding grids, Source-sink