[an error occurred while processing this directive]

高等学校化学研究 ›› 2004, Vol. 20 ›› Issue (4): 483-488.

• Articles • 上一篇    下一篇

A CFD Model for Fluid Dynamics in a Gas-fluidised Bed

ZHANG Kai1,2, Stefano Brandani2   

  1. 1. State Key Laboratory of Heavy Oil Processing, Faculty of Chemical Science & Engineering, University of Petroleum, Beijing 102249, P. R. China;
    2. Centre for CO2 Technology, Department of Chemical Engineering, University College London, London WC1E 7JE, UK
  • 收稿日期:2004-06-03 出版日期:2004-08-24 发布日期:2011-08-06
  • 基金资助:

    Supported by EU Commission(No.ENK5-CT2000-00314).

A CFD Model for Fluid Dynamics in a Gas-fluidised Bed

ZHANG Kai1,2, Stefano Brandani2   

  1. 1. State Key Laboratory of Heavy Oil Processing, Faculty of Chemical Science & Engineering, University of Petroleum, Beijing 102249, P. R. China;
    2. Centre for CO2 Technology, Department of Chemical Engineering, University College London, London WC1E 7JE, UK
  • Received:2004-06-03 Online:2004-08-24 Published:2011-08-06
  • Supported by:

    Supported by EU Commission(No.ENK5-CT2000-00314).

摘要: A modified particle bed model derived from the two-fluid momentum balance equations was employed to predict the gas-fluidised bed behaviour.Additional terms are included in both the fluid and the particle momentum balance equations to take into account the effect of the dispersed solid phase.This model has been extended to two-dimensional formulations and has been implemented in the commercial code CFX 4.3.The model correctly simulates the homogeneous fluidisation of Geldart Group A and the bubbling fluidisation of Geldart Group B in gas-solid fluidised beds.

关键词: Gas-solid fluidised beds, Modified particle bed model, Hydrodynamics, CFD simulation

Abstract: A modified particle bed model derived from the two-fluid momentum balance equations was employed to predict the gas-fluidised bed behaviour.Additional terms are included in both the fluid and the particle momentum balance equations to take into account the effect of the dispersed solid phase.This model has been extended to two-dimensional formulations and has been implemented in the commercial code CFX 4.3.The model correctly simulates the homogeneous fluidisation of Geldart Group A and the bubbling fluidisation of Geldart Group B in gas-solid fluidised beds.

Key words: Gas-solid fluidised beds, Modified particle bed model, Hydrodynamics, CFD simulation