[an error occurred while processing this directive]

高等学校化学研究 ›› 2011, Vol. 27 ›› Issue (1): 150-153.

• Articles • 上一篇    下一篇

Mushroom-shaped Morphology Formed in Thin Films of Cylinder-forming Block Copolymer

GONG Yu-mei*, SONG Jing-chuan and ZHANG Gui-xia   

  1. School of Chemical and Material, Dalian Polytechnic University, Dalian 116034, P. R. China
  • 收稿日期:2010-05-17 修回日期:2010-08-16 出版日期:2011-01-25 发布日期:2011-01-04
  • 通讯作者: GONG Yu-mei E-mail:ymgong@dlpu.edu.cn
  • 基金资助:

    Supported by the Liaoning Provincial Foundation for Doctors(China)(No.910502).

Mushroom-shaped Morphology Formed in Thin Films of Cylinder-forming Block Copolymer

GONG Yu-mei*, SONG Jing-chuan and ZHANG Gui-xia   

  1. School of Chemical and Material, Dalian Polytechnic University, Dalian 116034, P. R. China
  • Received:2010-05-17 Revised:2010-08-16 Online:2011-01-25 Published:2011-01-04
  • Contact: GONG Yu-mei E-mail:ymgong@dlpu.edu.cn
  • Supported by:

    Supported by the Liaoning Provincial Foundation for Doctors(China)(No.910502).

摘要: The morphology of the film of polystyrene-block-poly(methyl methacrylate)(PS-b-PMMA) block copolymer having polystyrene(PS) cylinder forming composition spin-coated on a neutral brush modified silicon substrate has been investigated in this report. A mushroom-shaped morphology formed in the film with one period to two periods(L0―2L0) in thickness, which was spin-coated under a low humidity condition(RH ca.13%) and then thermally annealed at an extreme high temperature(230 °C). The results suggest that the spin-coating condition together with the confinement conditions plays a crucial role in the interesting morphology formation.

关键词: Block copolymer, Film, Morphology

Abstract: The morphology of the film of polystyrene-block-poly(methyl methacrylate)(PS-b-PMMA) block copolymer having polystyrene(PS) cylinder forming composition spin-coated on a neutral brush modified silicon substrate has been investigated in this report. A mushroom-shaped morphology formed in the film with one period to two periods(L0―2L0) in thickness, which was spin-coated under a low humidity condition(RH ca.13%) and then thermally annealed at an extreme high temperature(230 °C). The results suggest that the spin-coating condition together with the confinement conditions plays a crucial role in the interesting morphology formation.

Key words: Block copolymer, Film, Morphology