Influence of Post-annealing in N2 on Structure and Electrochemical Characteristics of LiNi0.5Mn1.5O4

doi:10.1007/s40242-013-2190-z

高等学校化学研究 ›› 2013, Vol. 29 ›› Issue (2): 329-332.doi: 10.1007/s40242-013-2190-z

Influence of Post-annealing in N₂ on Structure and Electrochemical Characteristics of LiNi_0.5Mn_1.5O₄

HE Shi-ci¹, ZHANG Qian¹, LIU Wei-wei¹, FANG Guo-qing¹, SATO Yuichi², ZHENG Jun-wei¹, LI De-cheng¹

1. Institute of Chemical Power Sources, Soochow University, Suzhou 215006, P. R. China;
2. Department of Applied Chemistry, Faculty of Engineering, Kanagawa University, Yokohama 221-8686, Japan

收稿日期:2012-05-14 修回日期:2012-06-14 出版日期:2013-04-01 发布日期:2013-03-20
通讯作者: LI De-cheng E-mail:lidecheng@suda.edu.cn
基金资助:
Supported by the Project of Ministry of Science and Technology of China(No.2010EG111015).

Influence of Post-annealing in N₂ on Structure and Electrochemical Characteristics of LiNi_0.5Mn_1.5O₄

HE Shi-ci¹, ZHANG Qian¹, LIU Wei-wei¹, FANG Guo-qing¹, SATO Yuichi², ZHENG Jun-wei¹, LI De-cheng¹

1. Institute of Chemical Power Sources, Soochow University, Suzhou 215006, P. R. China;
2. Department of Applied Chemistry, Faculty of Engineering, Kanagawa University, Yokohama 221-8686, Japan

Received:2012-05-14 Revised:2012-06-14 Online:2013-04-01 Published:2013-03-20
Supported by:
Supported by the Project of Ministry of Science and Technology of China(No.2010EG111015).

摘要/Abstract

摘要：

LiNi_0.5Mn_1.5O₄ prepared by a spray drying method was re-treated in N₂ at 500, 600 and 700℃, respectively. Their structural and electrochemical properties were studied by means of Fourier transform infrared(FTIR), X-ray diffraction(XRD), and charge-discharge tests. The space group of the LiNi_0.5Mn_1.5O₄ transforms from P4₃32 to Fd3 m at an annealing temperature of 700℃. The electrochemical characteristics of the treated samples are closely related to the annealing temperature. The sample treated in N₂ at 500℃ shows both an improved rate capability and cyclic performance at a high temperature compared with the as-prepared sample, while the sample treated in N₂at 700℃ shows dramatically decrease in its reversible capacity.

关键词: Li-ion battery, Cathode material, LiNi_0.5Mn_1.5O₄, Structural and electrochemical property

Abstract:

Key words: Li-ion battery, Cathode material, LiNi_0.5Mn_1.5O₄, Structural and electrochemical property

HE Shi-ci, ZHANG Qian, LIU Wei-wei, FANG Guo-qing, SATO Yuichi, ZHENG Jun-wei, LI De-cheng. Influence of Post-annealing in N₂ on Structure and Electrochemical Characteristics of LiNi_0.5Mn_1.5O₄[J]. 高等学校化学研究, 2013, 29(2): 329-332.

参考文献

[1] Hu F., Du F., Chen Y., Wei Y. J., Ming X., Chen G., Wang C. Z., Chem. J. Chinese Universities, 2009, 30(8), 1492

[2] Wang S. J., Zhao Y. J., Zhao C. S., Xia D. G., Chem. J. Chinese Universities, 2009, 30(12), 2358

[3] Lu H. Q., Wu F., Su Y. F., Li N., Chen S., Bao L. Y.,Chem. J. Chinese Universities, 2011, 32(4), 946

[4] Sun Y., Yang Y., Zhao X., Shao H., Electrochim. Acta, 2011, 56,5934

[5] Fey G. T. K., Dahn J. R., Zhang M. J., Li W., J. Power Sources, 1997, 68,549

[6] Markevich E., Sharabi R., Gottlieb H., Borgel V., Fridman K., Salitra G., Aurbach D., Semrau G., Schmidt M. A., Schall N., Bruenig C., Electrochem. Communications, 2012, 15,22

[7] Li H. H., Jin J., Wei J. P., Zhou Z., Yan J., Electrochem. Communications, 2009, 11, 95

[8] Chang Z., Dai D., Tang H., Yu X., Yuan X., Wang H., Electrochim. Acta, 2010, 55, 5506

[9] Santhanam R., Rambabu B.,J. Power Sources，2010, 195, 5442

[10] Ma X., Kang B., Ceder G.J. Electrochem. Soc., 2010, 157(8), A925

[11] Aklalouch M., Amarilla J. M., Rojas R. M., Saadoune I., Rojo J. M., Electrochem. Communications, 2010,12,548

[12] Rajakumar S., Thirunakaran R., Sivashanmugam A., Gopukumar S.,J. Electrochem. Soc., 2010, 157(3), A333

[13] Amarill J. M., Rojas R. M., Rojo J. M.,J. Power Sources, 2011, 196, 5951

[14] Yang T., Zhang N., Lang Y., Sun K.,Electrochim. Acta, 2011, 56, 4058

[15] Wu H. M., Belharouak I., Abouimrane A., Sun Y. K., Amine K., J. Power Sources,2010, 195,2909

[16] Amine K., Tukamoto H., Yasuda H., Fujita Y., J. Electrochem. Soc., 1996, 143, 1607

[17] Zhao Q., Ye N., Li L., Yan F., Rare Metal Mat. Eng., 2010, 39(10), 1715

[18] Chang Z., Dai D., Li B., Tang H.,Acta Phys. Chim. Sin., 2010, 26(10), 2633

[19] Zhong Q., Bonakdarpour A., Zhang M., Gao Y., Dahn J., J. Electrochem. Society, 1997, 144, 205

[20] Kim J. H., Myung S. T., Yoon C., Kang S., Sun Y. K., Chem. Mater., 2004, 16, 906

[21] Li D., Ito A., Kobayakawa K., Noguchi H., Sato Y., J. Power Sources, 2006, 161, 1241

[22] Idemoto Y., Narai H., Koura N., J. Power Sources, 2003, 119, 125

[23] Li D., Ito A., Kobayakawa K., Noguchi H., Sato Y., Electrochim. Acta, 2007, 52, 1919

[24] Ohzuku T., Ariyoshi K., Yamamoto S., Makimura Y., Chem. Lett., 2001, 30, 1270

[25] Ariyoshi K., Iwakoshi Y., Nakayama N., Ohzuku T., J. Electrochem. Soc., 2004, 151, A296

[26] Amarilla J. M., Rojas R. M., Rojo J. M., J. Power Sources, 2011, 196, 5951

[27] Kim J. H., Yoon C., Myung S. T., Prakash J., Sun Y. K., Electrochem. Solid-state Lett., 2004, 7, A216

[28] Ito A., Li D., Lee Y., Kobayakawa K., Sato Y., J. Power Sources, 2008, 185, 1429

Influence of Post-annealing in N₂ on Structure and Electrochemical Characteristics of LiNi_0.5Mn_1.5O₄

Influence of Post-annealing in N₂ on Structure and Electrochemical Characteristics of LiNi_0.5Mn_1.5O₄

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价

[1]	ZHU Ruonan, WANG Jun, LI Jie. Li₄Mn₅O₁₂Cathode for Both 3 V and 4 V Lithium-ion Batteries[J]. 高等学校化学研究, 2021, 37(5): 1031-1043.
[2]	HOU Baoxiu, MA Linlin, ZANG Xiaohuan, SHANG Ningzhao, SONG Jianmin, ZHAO Xiaoxian, WANG Chun, QI Jian, WANG Jiangyan, YU Ranbo. Design and Construction of 3D Porous Na₃V₂(PO₄)₃/C as High Performance Cathode for Sodium Ion Batteries[J]. 高等学校化学研究, 2021, 37(2): 265-273.
[3]	WANG Dong, LI Zhenwei, ZHANG Qian, LIU Jie, YANG Yu, HAN Jishu, WANG Lei. Small Things Make a Big Difference: the Small-molecule Cross-linker of Robust Water-soluble Network Binders for Stable Si Anodes[J]. 高等学校化学研究, 2021, 37(2): 304-310.
[4]	WU Ying, YAO Yu, WANG Lifeng, YU Yan. Recent Progress on Modification Strategies of Alloy-based Anode Materials for Alkali-ion Batteries[J]. 高等学校化学研究, 2021, 37(2): 200-209.
[5]	ZHU Xiaobo, Tobias Schulli, WANG Lianzhou. Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries[J]. 高等学校化学研究, 2020, 36(1): 24-32.
[6]	ZHANG Ying, PAN Yue, LIU Jia, WANG Guiling, CAO Dianxue. Synthesis and Electrochemical Studies of Carbon-modified LiNiPO₄ as the Cathode Material of Li-ion Batteries[J]. 高等学校化学研究, 2015, 31(1): 117-122.
[7]	REN Yong-huan, WU Bo-rong, MU Dao-bin, YANG Chun-wei, ZHANG Cun-zhong, WU Feng. Optimization of Electrolyte Conductivity for Li-ion Batteries Based on Mass Triangle Model[J]. 高等学校化学研究, 2013, 29(1): 116-120.
[8]	HUANG You-ju, LIN Yu-li, LI Wei-shan. Manganese Dioxide with High Specific Surface Area for Alkaline Battery[J]. 高等学校化学研究, 2012, 28(5): 874-877 .